Hobbywing 30401054 XERUN-3652SD 5100KV Competition Sensored Brushless Motor  [HW-30401054]

HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054
Price:
CAD$0.00
Brand:
Hobbywing
Model:
HW-30401054
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"
alt="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054" title="HOBBYWING XERUN-3652SD-5100KV-D3.175-G2 - 30401054"

Race-Ready Hobbywing 30401054 XERUN-3652SD 5100KV Overview

The Hobbywing 30401054 XERUN-3652SD 5100KV motor is a sensored brushless unit for 1/10 scale RC cars, engineered to improve throttle precision and overall efficiency. Its sensored setup helps with smooth starts and consistent control at low speeds, making it a practical upgrade for club and track racing.

Tuning-Focused Specifications

  • Type: Brushless Sensored
  • KV Rating: 5100
  • LiPo Cells: 2S
  • No-load Current: 4.7A
  • Resistance: 3.5mΩ
  • Outer Diameter: 36mm
  • Length: 52.5mm
  • Shaft Diameter: 3.175mm
  • Weight: 192g
  • Timing: Adjustable 20-40 Degrees

Best Uses and Setup Tips

This motor fits pilots who want reliable power and tunable response for 1/10 race cars. Adjustable timing allows you to dial in acceleration or top-end speed depending on circuit layout and driving style.

It is compatible with most 1/10 scale RC cars that accept a 36mm diameter motor. Check bell clearance and mount spacing before installation.
Timing can be set between 20 and 40 degrees using the correct timing tool or adapter on the motor end. Make small changes and test on-track to find the best setting.
Use an ESC that supports sensored operation and a 2S LiPo pack as specified. Ensure the ESC can handle the sustained current your setup will draw.

Copyright © 2008-2025 rcjaz.ca All rights reserved