Hobbywing 86010020 - UBEC 5A HV Accessory Compact Power Regulator  [HW-86010020]

HOBBYWING UBEC 5A HV (3-10S) - 86010020
Price:
CAD$37.11
Brand:
Hobbywing
Model:
HW-86010020
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Stable UBEC Power for Demanding RC Models

The Hobbywing 86010020 - UBEC 5A HV Accessory is built to provide dependable voltage regulation for a wide range of RC setups. This external switching DC-DC regulator accepts 3-10S LiPo input and converts it to a steady output suitable for receivers, servos and other on-board electronics. With a continuous 5A rating, the unit is ideal for larger fixed-wing aircraft and helicopters that use higher voltage battery packs.

Selectable 5V or 6V Output

You can choose either 5V or 6V output using the supplied jumper cap to match your electronics. The UBEC handles short peaks up to 7.5A, so it copes with transient current demands from servos and gear without dropping voltage.

Small Footprint and Light Weight

At 48x27x9mm and just 30g, the Hobbywing 86010020 - UBEC 5A HV Accessory fits into tight installations without adding unnecessary mass. Its efficient switching design keeps heat and standby draw low for longer flights.

Specifications

  • Output Voltage/Current: 5V@5A/7.5A or 6V@5A/7.5A (adjustable)
  • Quiescent Current: 20mA
  • Input Voltage: 8-42V (3-10S LiPo)
  • Dimensions: 48x27x9mm
  • Weight: 30g

If you need steady, compact power regulation for large aircraft or helicopters, the Hobbywing 86010020 - UBEC 5A HV Accessory offers a practical, low-weight solution.

Yes. The input range of 8-42V means the unit supports 3S up to 10S LiPo packs, so it will work with 10S setups within that voltage window.
Use the jumper cap supplied with the UBEC to select either 5V or 6V. Make the change with power removed, and double-check your servo and receiver voltage requirements before powering up.
The continuous rating is 5A with short peaks up to 7.5A. For multiple high-torque servos or heavy cyclic loads, verify combined stall currents to avoid overloading the UBEC.

Copyright © 2008-2025 rcjaz.ca All rights reserved