6EXAP 6-Channel PCM 72Mhz/ R146IP Futaba [6EXAP_c11]

Price:

CAD$173.40

Brand:

Futaba

Model:

6EXAP_c11

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba 6EXAP 6-Channel PCM 72Mhz/ R146IP Flight Transmitters System

FEATURES:

Aileron, Elevator and Rudder twin cost switch - use this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are generate nonetheless select, but generally, once the switch is ��up�� the throws are greater (��high rate��) whenever switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if utilized).
Flap control dial/Channel 6 - This dial runs the servo connected with channel 6 in to the receiver if your model has flaps here is the control frequently run them.Aileron/elevator control stick -Mounting point for optional throat band.
Trim levers (all) -Used to get the principal or center host to every servo as labeled toward diagram.
Charging you jack - Port for billing you the transmitter batteries with all the current included battery power charger.
On-off switch
DATA INPUT lever - constantly exchange the values concerning the different functions presented towards LCD display screen.
Liquid-crystal display (LCD) - shows development modes and values joined with.
MODE key - usually scroll through and show the ten or eleven(PCM) different functions.
PICK key - accustomed show the values the prevailing function.
Throttle-cut switch - to make use of the throttle-cut function, paid off the throttle stick completely, then drive the throttle-cut key to completely shut the carburetor and shut in direction of motor.
Throttle/rudder control stick - runs the servos mounted on channel 3 (throttle) and channel 4 (rudder) in receiver.
Trainer switch - operates the trainer functions. To work with as a trainer switch the transmitter should really be installed on another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - Switch operates the servo mounted on channel 5 on receiver should your model has retractable landing gear here is the control accustomed increase and retract kit.
Antenna - Radiates signals towards receiver. Never travel a model without entirely expanding the antenna or maybe you might perhaps create disruption to a lot of other modelers and decrease practical indicator assortment of the transmitter. The antenna may be expunged and changed with another just in case it's accidentally broken.

Hot Brands

6EXAP 6-Channel PCM 72Mhz/ R146IP Futaba [6EXAP_c11]