6EXAP 6-Channel FM 72Mhz/ R136F/ 4xS3003 Futaba [6EXAP_c6]

Price:

CAD$200.41

Brand:

Futaba

Model:

6EXAP_c6

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin expense switch - utilize this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are generate nonetheless choose, generally, whenever switch is ��up�� the throws are greater (��high rate��) whenever switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential costs (if used).
Flap control dial/Channel 6 - This dial runs the servo attached to channel 6 inside receiver in the event the model has flaps here is the control helpful to make use of them.Aileron/elevator control stick -Mounting point for optional neck band.
Trim levers (all) -Used to maneuver the essential or center host to every servo as labeled in diagram.
Recharging jack - Port for asking the transmitter batteries utilising the included battery charger.
On-off switch
INFORMATION INPUT lever - usually replace the values this is why various functions exhibited inside LCD display.
Liquid-crystal display (LCD) - shows development modes and values joined up with up with.
MODE key - frequently scroll through and show the ten or eleven(PCM) various functions.
PICK key - constantly expose the values the present function.
Throttle-cut key - doing business with the throttle-cut function, paid off the throttle stick completely, then drive the throttle-cut change to completely shut the carburetor and shut associated with motor.
Throttle/rudder control stick - operates the servos mounted on channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - runs the trainer functions. To use as a trainer switch the transmitter should really be linked to another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - modification operates the servo connected to channel 5 towards receiver in the case your model has retractable landing gear here is the control accustomed expand and retract the apparatus.
Antenna - Radiates signals towards receiver. Cannot ever travel a model without entirely extending the antenna as well as you could possibly create interruption along with other modelers and decrease practical indicator variety of the transmitter. The antenna may be eliminated and changed with another whenever it is in reality unintentionally broken.

Hot Brands

6EXAP 6-Channel FM 72Mhz/ R136F/ 4xS3003 Futaba [6EXAP_c6]