6EXAP 6-Channel FM 35Mhz/ R136F/ 4xS3003 Futaba [6EXAP_c5]

Price:

CAD$200.41

Brand:

Futaba

Model:

6EXAP_c5

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

FEATURES:

Aileron, Elevator and Rudder double cost switch - utilize this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are setup you need, but the most of that point duration, if switch is ��up�� the throws are greater (��high rate��) as soon as the switch is ��down�� the throws are less (��low rate��). This switch besides flips between exponential prices (if utilized).
Flap control dial/Channel 6 - This dial runs the servo connected with channel 6 inside receiver if the model has flaps this is actually the control regularly work them.Aileron/elevator control stick -Mounting point for optional neck strap.
Trim levers (all) -Used to go the primary or center host to every servo as labeled inside diagram.
Asking jack - Port for recharging you the transmitter batteries along with the included battery pack charger.
On-off switch
DATA INPUT lever - frequently exchange the values associated with different functions exhibited regarding LCD screen.
Liquid-crystal display (LCD) - shows development modes and values joined up with up with.
MODE key - accustomed scroll through and show the ten or eleven(PCM) different functions.
CHOOSE key - accustomed display the values the present function.
Throttle-cut key - to work with the throttle-cut function, repaid the throttle stick entirely, then drive the throttle-cut key to fully shut the carburetor and shut the motor.
Throttle/rudder control stick - runs the servos related to channel 3 (throttle) and channel 4 (rudder) in receiver.
Trainer switch - runs the trainer functions. To work with as a trainer switch the transmitter must be connected with another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - modification operates the servo connected to channel 5 in the receiver as soon as your model has retractable landing gear this is actually the control accustomed extend and retract the gear.
Antenna - Radiates signals towards the receiver. Cannot ever travel a model without completely expanding the antenna or perhaps you can produce disruption to numerous other modelers and decrease practical indication range of the transmitter. The antenna could be eliminated and changed with another just in case its accidentally broken.

Hot Brands

6EXAP 6-Channel FM 35Mhz/ R136F/ 4xS3003 Futaba [6EXAP_c5]