18-Channel 2.4G T-FHSS with R7008SB TX-Li Ion 18MZ Airplane Version Transmitter - Futaba 18MZA  [FP-18MZA-WC]

Futaba 18MZ 18-channel 2.4GHz Computer broadcast System
whenever sheer wide range of actions it is possible to just take combined with the 18MZ is impressive, the amount of means it gives you for doing them is completely nothing in short supply of awe-inspiring. There's computer programs for airplanes, helis and gliders, eight trip conditions and ten programmable mixes for every single and numerous factory-programmed mixes. And many other things features than you'll almost certainly within several years of traveling.

If that's genuine, well-known genuine real genuine real question is, "Why have them?" The effect is straightforward: it's because no two pilots arranged a radio in properly identical means. The primary description the 18MZ provides such unparalleled setup and performance freedom is fairly perhaps it's setup inside primary way of all: yours.

Features:

• Utilising the high-voltage R7008SB, your servo and channel choices are wide open.Use around 8 systems with standard PWM outputs,up to 18 companies (16 proportional + 2 switched) through two S.Bus ports, and luxuriate in S.Bus setup convenience and programmable performance.
• Built-in 0.3 megapixel camera makes using aircraft ID photos simple and fast.
• The 6" diagonal (152 mm) HVGA touchscreen display provides 640 x 240 meaning and adjustable backlighting for outstanding existence. SensorTouch technology lets you navigate and prepare with cost and ease.
• Two USB ports offer easy how to relate genuinely to a keyboard or mouse, get hold of and wardrobe telemetry information or access setups saved on an external memory stick.
• This serial program offers the exact same convenience the moment the stand-alone CIU-2. It's well suited for development GY520 and CGY750 gyros, and S.Bus and S.Bus2 Servos.
• Stick views adjust effectively, to tailor the 18MZ's feel towards hand.
• The 18MZ is sold with a 7.4V, 3500mAh LiPo transmitter battery power. Provides power for approximately 6 hours of uninterrupted traveling.
• With effortless Link ID, it is possible to link the transmitter and receiver with a tap concerning the touch screen.
• Large spacing between neck switches renders space the fingers to remainder.
• The removal of one screw frees the entire switch block. Particular switches are unscrewed for effortless replacement or relocated for a custom setup.
• Look to the 18MZ, while'll grasp Futaba's dedication to reliability at every modification, through utilizing area mount technology to attenuate the end result of vibration to Ball Grid Array to pack probably one of the most radio anyway area.
• Jacks for S.Bus servo development, in-transmitter recharging as well as the earphone can be obtained on straight back panel for fast access and protection.
• The high-voltage R7008SB works together alongside Futaba telemetry sensors, including S.Bus and S.Bus2 servos. Both are plug toward R7008SB, without pc software containers and decoders needed by other systems.* Decoder needed if non-S.Bus servos are utilized.

Overview:

• Practices: 16 proportional, 2 switched
• Suitable for:
  • FASSTest, FASST and S-FHSS protocols
  • Futaba HV (High-Voltage) receivers
  • All Futaba telemetry sensors
• Free on the web software improvements
• 92MB interior memory
• Expandable model memory
• 32-character specific naming
• 32-character model naming
• Airplane, helicopter, glider and engine glider development
• 3 assignable rotary knobs
• 4 assignable slider switches (2/side)
• 5 assignable three-position switches
• 2 assignable two-position switches
• 1 assignable momentary two-position switch
• Dual, high-speed processors
• Earphone jack
• 0.3 megapixel camera
• Audio & film players
• integrated microphone
• Development tools for S.Bus servos & gyros
• Easy Link ID touchscreen
• Comfortable artificial grips regarding sides and back
• Stick calibration, plus anxiety and angle corrections
• Quad bearing gimbals
• Quick model select
• Servo monitor (fundamental and going tests)
• 2 up/down timers
• integrated timer system
• Model timer
• 4 vibration warning alternatives (battery power, condition, trim mix 1 & 2)
• Programmable trainer system
• Servo rate adjust
• Trim mix
• Programmable logic switches
• Consumer menu
• Sub-trim (240 actions; networks 1-16)
• Servo reversing (all systems)
• Fail-Safe (all sites)
• Battery fail-safe (all linear sites)
• Endpoint modification (all channels)
• Trim (adjustable action, price & mode)
• Journey conditions
• AFR
• AFR fold mode (6)
• AFR fold point volume (15)

Airplane development features:

• 8 journey conditions
• 15 factory-programmed mixes
• Flap developing menu
• Differential ailerons
• Aileron to camber flap mixing
• Aileron to brake flap mixing
• Aileron to rudder mixing
• Airbrake to elevon Mixing
• Rudder to ailevator blending
• Rudder to elevator blending
• Camber combining
• Elevator to camber blending
• Camber flap to elevator mixing
• Snap roll combining
• Airbrake mixing
• V-Tail mixing
• Motor blending
• Fuel mixture
• Multi-Engine mixing
• Gyro blending

R7008SB Receiver Features:

• Bi-directional reference to a FASSTest Futaba transmitter utilising the S.Bus2 slot
• Multiple optional telemetry sensors could be for this S.Bus2 slot and the information exhibited regarding transmitter
• Includes both standard PWM production ports and S.Bus production ports
• External voltage slot, 0-70V DC
• The outside Voltage connector necessary for this can be:FUTM5551 CA-RVIN-700 EX VLT CBL

R7008SB Receiver Specs:

• Getting Frequency: 2.4GHz FASSTest system
• Energy Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
• Current drain: 75mA
• Exterior voltage Port: 0 - 70V DC
• Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
• Body fat: 0.38oz (10.9g)
• Antenna Length: 5-3/4"