EDS 181002 Chassis Droop Gauge Blocks 20mm for 1/8 and 1/10 Scale Models  [EDS-181002]

Setup Precision with EDS 181002 Gauge Blocks

For RC tuners seeking reliable setup data, the EDS 181002 Chassis Droop Gauge Blocks provide consistent, repeatable measurements. Made for 1/8 and 1/10 scale cars, the 20mm blocks help you establish a solid suspension baseline.

What chassis droop means for handling

Chassis droop is the suspension travel when the car is lifted off the ground and it directly affects balance, traction and corner entry. Correct droop helps keep handling predictable across tarmac and loose surfaces.

Using the 20mm blocks on your model

These blocks are sized to work with common 1/8 and 1/10 buggies and touring cars. Simply slide the blocks under the chassis and adjust shock positions or preload until the car sits on the block at the desired droop measurement.