Arrowmax AM-220018-O 1.8mm Long Drill for Mini 4WD Benchwork [AM-220018-O]

Arrowmax AM-220018-O Drill 1.8MM Long For 1/32 Mini 4WD (Orange)

Price:

CAD$18.56

Brand:

Arrowmax

Model:

AM-220018-O

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Mini 4WD / Kids - Mini 4WD Series - Set-up Tools

Precision 1.8mm Long Drill for Tight Mini 4WD Work

The Arrowmax AM-220018-O 1.8mm long drill is tailored for Tamiya Mini 4WD 1/32 scale kits and is ideal when you need extra reach for confined mounting points. Its longer flute helps access recessed spots while the bright orange finish makes the tool easy to spot on a busy bench. Suitable for careful setup adjustments and small mod work, it supports accurate hole placement for both track tuning and display detailing.

Can this 1.8mm drill be used on standard Mini 4WD plastics?

Yes. It works well on typical ABS and polystyrene used in Tamiya Mini 4WD parts, but go slow and support the piece to avoid cracking. Use light pressure and a steady hand.

What is the best method to keep holes straight with this long bit?

Clamp or hold the part firmly and start with a pilot mark. Use a pin vise or low-speed drill and align the bit before applying pressure to maintain a straight, clean hole.

How should I store and care for the drill?

Keep it dry and in a holder to prevent bending. Clean with a small brush after use and avoid dropping the bit to preserve the tip geometry and accuracy.