3RACING 3RAC-PG4826 48 Pitch 26T Hard Coated Pinion Gear  [3RAC-PG4826]

3RACING 48 Pitch Pinion Gear 26T (7075 w/ Hard Coating) - 3RAC-PG4826
Price:
CAD$5.24
Brand:
3Racing
Model:
3RAC-PG4826
Condition:
Brand New
Write a review

Performance Upgrade for Street and Track

The 3Racing 48 Pitch Pinion Gear 26T is machined from 7075 aluminum and finished with a hard coating to resist wear under sustained loads. It helps reduce drivetrain losses and keeps power delivery consistent during spirited driving and track sessions.

Material Benefits and Wear Resistance

Constructed from 7075 aluminum, this 26T pinion balances strength with low weight, while the hard coating improves surface life under pinion mesh stress. That combination delivers reliable service life in demanding use.

Suitable Models and Applications

This 48 pitch 26T pinion suits many 1/10 scale setups and adapts well to both touring and buggy platforms. Use it when you want a balance between acceleration and top speed across varied terrain.

How do I set the gear mesh for the 3RACING 3RAC-PG4826?

Check mesh using a thin sheet of paper between the pinion and spur, adjust motor plate until there is a slight drag, then secure hardware and recheck under load. Proper mesh prevents premature wear.

What routine care keeps the hard coating effective?

Inspect the teeth for nicks or burrs, remove debris after runs, and avoid harsh solvents on the coating. Replace the pinion if tooth damage is visible to protect the spur gear.

Can I use this 26T with other 48 pitch spurs?

Yes, the 3RACING 26T fits standard 48 pitch spurs. Confirm tooth count and mesh with your specific spur to achieve the desired final drive ratio.

Copyright © 2008-2025 rcjaz.ca All rights reserved