3RACING 3RB-MR63-ZZ/W2/10 Double Metal Shield Bearings 3 x 6 x 2 mm 10 Pack  [3RB-MR63-ZZ/W2/10]

Price:
CAD$10.47
Brand:
3Racing
Model:
3RB-MR63-ZZ/W2/10
Condition:
Brand New
Write a review

Smoother rolling and reduced friction for everyday RC use

The 3RACING Double Metal Shield Bearing 3 x 6 x 2 mm is a simple, effective upgrade for modelers who want steadier wheel spin and less drivetrain drag. These shielded metal bearings are sized to suit a wide range of small RC components and help maintain consistent rotation during higher speed runs.

Works well across on-road and light off-road applications

These metal shield bearings are suitable for both asphalt track sessions and mixed-surface practice. The sealed shields keep out loose grit and help preserve function, reducing how often you need to replace bearings in everyday use.

Basic fitting and care tips

Before fitting the 3RACING bearings, clean housings and shafts to avoid trapping debris. Apply a small amount of light bearing oil to the races for best performance, then check fit and spin freely. Routine checks and light lubrication will extend service life.

Can these 3 x 6 x 2 mm bearings be used in 1/10 scale cars?

Many 1/10 scale setups accept 3 x 6 x 2 mm bearings, but check your car's hub and shaft bore dimensions to confirm the inner and outer diameters match.

Should I use oil or grease on these sealed bearings?

For shielded metal bearings a light bearing oil is often best to reduce friction without trapping dirt. Use only a small amount and avoid heavy greases that can attract particles.

How do I tell when a bearing needs replacing?

Listen for roughness or grinding and check for play on the shaft. If rotation feels gritty or performance drops, swap the bearing to restore smooth operation.

Copyright © 2008-2025 rcjaz.ca All rights reserved